Spray Foam Hurricane Adhesive

Spray Foam Hurricane Adhesive is foam adhesive sprayed to the underside of the roof structure. It glues the roof down to the trusses from the inside (existing & new buildings) to form a one piece solid structure to prevent the loss of your roof sheeting.

It will strengthen your roof 300% and create a secondary water barrier to keep the water out of your home during a hurricane even if you lose your shingles or tiles. It also has an outstanding R7 insulation value (per 1" sprayed) Foam Adhesive.
85% of all hurricane damage comes from water intrusion after you lose your shingles or tiles.

Dade County Approved Products
Dow Product    BASF Product

DIY Spray Foam Insulation

If you are an energetic person who is in good health, likes to do your own small jobs and you don’t mind working in a hot attic, then our Do It Yourself spray foam insulation kit may be just for you.

It’s great for sealing around AC ducts to prevent air leakage. It can also be sprayed into open walls or onto the underside of your attic roof deck for insulating new room additions.

It is perfect to insulate that hot box of a garage where you may have no insulation.

It is available in open or closed cell. You can even use the closed cell foam to seal roof leaks from inside your attic and put off replacing that costly re-roof job.

Heat Reflective Radiant Barrier

Decrease your utility bills. Increase the comfort of your home. By professionally installing a reflective radiant barrier to the underside of your roof you can reflect up to 96% of the radiant heat energy from the sun back through your roof. As a result, your attic space is up to 30° cooler, which leads to a more comfortable and consistent temperature throughout your home by eliminating hot spots.

By eliminating the oven-like condition in your attic it will increase the performance of your insulation and ductwork, and decreased workload on your air conditioner and extend its life. Enerflex Radiant Barrier foil will quickly pay for itself in utility bill savings.

U.S. Department of Energy: www.energy.gov
Florida Solar Energy Center: www.fsec.ucf.edu

DIY Heat Reflective Radiant Barrier

If you are an energetic person who is in good health, likes to do your own small jobs and you don’t mind working in a hot attic, then our Do It Yourself reflective radiant barrier kit may be just for you.

It’s great for getting rid of hot spots in your house by placing panels in your attic to the underside of your roof deck over rooms that always seem to be hot.

It is perfect to insulate that hot box of a garage where you may have no insulation.

It comes in 16" x 48" and 24" x 48" panels with 50 panels per carton. Each sheet has three spring steel rods that lock the sheets into place between the rafters that secures the barrier where it will never fall down like other radiant barriers that are held up by staples only.